Luxtron LED headlight bulbs
Swap yellow for white.
Luxtron LED headlight bulbs replace the yellow glow of factory halogen bulbs with crisp 6500K white light. There are thirteen socket types, each sold as a matched pair, and every bulb has a built-in cooling fan.
- 6500K whiteCrisp, cool white light
- Cooling fanBuilt into every bulb
- 13 socket typesCars, trucks and SUVs
- 18-month warrantyManufacturer warranty
Why LED
White light, without the yellow.
Factory halogen bulbs give a warm, yellow light. Luxtron bulbs run at 6500K, a crisp cool white that looks modern on any vehicle.
Every bulb has a built-in cooling fan. Heat is what wears an LED out, so the fan helps the bulb keep its brightness.
- 6500K cool white
- Built-in cooling fan on every bulb
- Sold in matched pairs
In the box
A matched pair, ready to fit.
Each Luxtron box holds two bulbs, one for each side, packed in foam. Most fit in ten to fifteen minutes a side: open the headlight access panel, twist out the old bulb, plug the LED in and clip it home.
Handle the bulb by its base. Skin oil on the light chips shortens their life.
Socket finder
Thirteen sockets, one table
Find the code on your old bulb, then find it here. Every Luxtron bulb is 6500K white, has a cooling fan, and is sold as a pair.
| Socket code | Luxtron model | Series | Fitting |
|---|---|---|---|
| 9005 | C2-9005 | C2 series | Plug-and-play |
| 9006 | C2-9006 | C2 series | Plug-and-play |
| 9007 | C2-9007 | C2 series | Plug-and-play |
| H13 | C2-H13 | C2 series | Plug-and-play |
| H3 | C2-H3 | C2 series | Plug-and-play |
| H1 | Y1-H1 | Y1 series | Plug-and-play |
| H4 | Y1-H4 | Y1 series | Plug-and-play |
| H7 | Y1-H7 | Y1 series | Plug-and-play |
| H11 | Y1-H11 | Y1 series | Plug-and-play |
| H15 | H15-01 | H15 | Plug-and-play |
| 9012 | M29-9012 | External driver | Driver box to mount |
| D1S / D3S | D1S/D3S | HID replacement | Driver box to mount |
| D2S / D4S | D2S/D4S | HID replacement | Driver box to mount |
Before you order
Three steps to the right bulb
Read the code
The socket code is printed on the base of the bulb in your car, and it's in the owner's manual: 9005, H11, H7 and so on.
Check both beams
Many vehicles use one code for the low beam and a different one for the high beam. Check both before you order.
Fit as a pair
Replace both sides together. One LED next to one halogen is an obvious colour mismatch.
Not sure? Bring the old bulb to Stallion Auto in Edmonton and it can be matched in seconds.
Questions
Good to know
Which bulb do I need?
Read the socket code on the base of your current bulb, or look it up in your owner's manual. If you're unsure, bring the old bulb to Stallion Auto and it can be matched in seconds.
Can I fit them myself?
Most Luxtron bulbs are plug-and-play and take ten to fifteen minutes a side. The 9012, D1S/D3S and D2S/D4S types have a separate driver box that needs mounting and wiring, so a professional fitting is recommended for those.
Do I have to replace both sides?
Luxtron bulbs are sold in pairs, and we recommend fitting both at once. One LED next to one halogen is an obvious colour mismatch.
Will other drivers be dazzled?
Fit the bulb so it's fully seated and turned the right way in the housing, then have your headlight aim checked. A bulb that sits properly throws its light where the headlight was designed to.
Is there a warranty?
Yes. Luxtron bulbs carry an 18-month manufacturer warranty.
Ready for Luxtron?
Buying for your own vehicle? Shop online at Stallion Auto, or visit us in Edmonton. Running a shop or dealership? Apply for a trade account with First Auto Nation.